Drilling machine in Shandong province carried out three aspects of the inspection requirements, if any abnormalities are found, should prompt diagnosis and improvement measures.

Maintenance, filter: filter to filter oil or gas impurities in the role, prevented the intrusion system resulting in failure; various filter to be replaced on a regular basis as and when required; when replacing the filter cartridge, you should check whether there is metal on attached to the old filter, if you find any metal particles, improvement measures should be taken to timely diagnosis and use comply with pure filter machine.

Second, lubricant management: used oil can reduce the wear of the moving surfaces to prevent noise. Grease storage storage and cannot be mixed with dust, sand, water and other impurities; recommend using lithium base grease G2-L1, good anti-wear properties apply overload situation; raise, to all of the old oil and clean as possible to prevent soil adhesion.

Third, fuel management: according to different ambient temperatures use different grades of diesel fuel diesel cannot be mixed with impurities, dirt and water, otherwise premature wear of the fuel pump; poor quality paraffin wax with high sulphur content in the fuel, will avoid damage to the engine daily operations after the fuel tank to fill up with fuel, prevent the machine produce water droplets on the inner wall.

Above is the daily need to check the drilling machine in Shandong province, hoped small summary can give you some help.